Please note** Due to the anodizing process, the pattern may vary from the example photographed above.
Built for Performance
Our patent pending Modular Vortex System has been thoughtfully designed to give you the most control of your airflow.
The sleek two-part titanium stem now has two airport configurations, with all the wiggle room in between. The top half houses a standard fully open airport AND the new dual turbulent airport. Rotate the bottom half of the stem to adjust airflow as needed with our signature teardrop airport to curate the perfect hit. And don’t forget to flutter the airport to really get the best pull.
Modularity at its Finest
The core of the MVS is our patent pending telescoping mouthpiece system. Now you can choose between the stationary mouthpiece (( Stinger )) or the NEW spinning mouthpiece. Each mouthpiece comes with the Dual condenser pack which enables adjustment from 45mm – 85mm. With the adjustable mouthpiece system, you can adjust the length of your device on the fly with the Regulator valves. With the NEW Mini Valve, you can have the full airflow modularity of the standard regulator, now in a more compact package, Measuring 63mm when paired with the mouthpiece.
These mouthpieces are also made to be adaptable to any OEM or aftermarket DynaVap stem.
Our titanium intercoolers work by elongating the vapor path and acting as a heat sink to extract heat from the vapor. The T-design on the intercoolers are a built-in safety feature to prevent inhalation. It also acts as a filter to stop scooby snacks coming through the screen. When cleaning, the intercooler is a great way to capture your reclaim as it scrapes the inside of the condenser when removed. This gives a great initial clean and is an optimal way to capture your reclaim if you’re into that sort of thing. Originally introduced with the unibody Vortex stem, the Intercooler is one of the main features of our patent pending Vortex System. We have since created NEW intercoolers to further modify your experience.
MVS Standard Titanium Intercooler
- Designed with a slightly larger outside diameter to fit MVS condensers more precisely.
- Designed for the best balance of airflow, flavor and cooling.
- Fits MVS condenser systems.
Flavorful High Flow
- Featuring less twists, the highflow intercooler increases the flavor and airflow while slightly reducing the amount of cooling that the standard intercooler provides.
- Fits both unibody Vortex stems, and MVS condenser systems..
- Designed for more cooling, the XL intercooler has an increased surface area of 60%.
- However it does reduce the airflow and flavor when compared to the other options.
- Fits XL MVS systems.
No DynaVap Tip Limitations & More device adaptations.
The MVS’s modularity is apparent right down to the tip and cap. Unlike other stems in the marketplace, the MVS is not limited to a specific tip. It will work with both stainless steel AND titanium tips from any generation.
Mix and match your tips and caps, find your preferred airflow and start having an extraction experience like no other, tailored just for you.
With the outside diameter of the MVS, it is adaptable to a wide range of other thermal extraction devices.
Even Easier to Clean & Maintain
The MVS is as easy to clean as it is to put together. Disassemble, remove intercooler from Stinger and soak all the parts in ISO. Rinse clean and dry before putting it back together