01 · Microdose platform
Improved Grip. Interchangeable Sleeves.
The Simrell: Hydro S brings improved grip, interchangeable sleeves and your choice of torch or induction heating to our microdose desktop platform.
Designed for water pieces and dry pipes, it pairs our titanium extraction chamber with a threaded 14mm stainless steel adapter in a compact, modular build.
02 · Grip
No More Clip-On Handle
The Hydro S features a Titanium Sleeve Extension and Black Ultem Sleeve, eliminating the need for the original clip-on handle. The sleeve provides a larger gripping surface for handling, assembly and disassembly.
The extension threads between the 14mm adapter and extraction chamber, securing the sleeve in place. Swap the included Black Ultem Sleeve for another compatible Vortex sleeve to personalize your setup. Matching reverse thread connections also allow you to stack additional extensions for a longer build.
03 · Torch
Stainless Thermal Assembly
Our stainless thermal assembly features increased airflow, optimized heat retention, three visual heating references and low- and high-temperature audible indicators.
No rotation is required. Aim your torch at your chosen reference point and use the clicks to guide your heat-up.
- Top indicator: lower-temperature, flavor-focused extraction.
-
Middle indicator: a balanced starting point for hybrid extraction.
-
Bottom indicator: more direct chamber heating for denser vapor.
A small to medium single-flame torch is the recommended starting point. With a larger torch such as the Blazer Big Shot, keep the flame at or above the middle indicator and stop heating at the first click.
04 · Induction
New Induction Heater Assembly
Our new Induction Heater Assembly is optimized for fast heat-up with a compatible induction heater. At 100 watts, expect approximately 22 seconds for the initial heat-up and 12 to 15 seconds for consecutive heating cycles. Timing varies with heater settings and the assembly starting temperature.
The induction version retains the same titanium chamber, sleeve extension and 14mm connection.
Quick tip: use a leather loop for an insulated grip when removing and handling the thermal assembly between cycles. The induction version is available in a polished finish only. Induction heater sold separately.
05 · Your rig
Built Around Your Rig
The threaded 14mm stainless steel adapter provides a secure connection between the Hydro S and your compatible water piece or dry pipe.
With a chamber capacity of approximately 0.05 to 0.15g, the Hydro S is built for small loads and controlled extraction. Its modular construction also allows you to pair the chamber and thermal assembly with a compatible Titanium Vortex or Heritage stem for a more portable setup.
Small batches
Crafted in Small Batches
Every Hydro S is precision machined, inspected and assembled by our family-run operation here in the USA. Titanium and stainless steel form the core of the platform, with replaceable components designed for long-term use.
06 · In the box
What Is Included
- Titanium Extraction Chamber
-
Your choice of Stainless Thermal Assembly or Induction Heater Assembly
-
Titanium Sleeve Extension
-
Black Ultem Sleeve
-
Threaded 14mm Stainless Steel Adapter
-
Titanium Screen
Additional sleeves, extensions, water pieces, dry pipes, torches, induction heaters and Vortex stems are sold separately. The Sleeve Extension is not compatible with the Hydro XL.
100% Made in the USA.Titanium and stainless steel.
No batteries. No electronics.
Made right here in Ohio.Your ritual. Your rules.
